Terminals for enclosures
EL000 to EL666
CHARAKTERIZATION
| - series of screw terminal boxes intended
for build in to enclosure EL - terminals delivered open immediately ready for mounting - body of terminals made from self-quenching safety plastic - terminals with combined cross head screws M3 - terminals with captive left-turn-resistant screws - output with soldering eyelets - very fast, convenient for electric screw drivers - tested and approved according European norms EN60998-1, EN60998-2-1, EN60999-1 |
| TECHNICAL PARAMETERS | |
| Soldering contact gap | 6,5 mm |
| Maximum current | 20 A AC |
| Nominal voltage | 450 V AC |
| Cross section of connecting wire | 0,1 ... 4 mm2 |
| Dielectric strength contact-contact | 4000 V |
| Flammability resistance | UL94V1 |
| Body of terminal material | Noryl SE1 (General Electric) |
| Protection category | IP20 |
| Ambient temperature | -25 ... +85° C |
| Humidity up to | up to 93% by 25°C |
| Code of terminals ELXXX : X = 6 - position with contact X = 0 - position without contact |
Sample of terminal EL660 |
 |
home BOXES 22,5mm : description dimensions terminals photos assembling
